User guide

3. Load the paper with the side to be printed on facing up.

4. Squeeze the multi-purpose tray paper width guides and adjust them to the width of the paper.

Do not force too much, or the paper will bent resulting in a paper jam or skew.

5. When you print a document, set the paper type and size for the multi-purpose tray.

For information about setting the paper type and size on the control panel. (See Setting the

paper size and type.)

When printing the special media, you must follow the loading guideline. (See Printing on

special media.)

When papers overlap when printing using Multi-purpose tray, open tray 1 and remove

overlapping papers then try printing again.

When paper does not feed well while printing, push the paper in manually until it starts

feeding automatically.

The settings made from the machine driver override the settings on the control panel.

1. To print in application, open an application and start the print menu.

2. Open Printing Preferences. (See Opening printing preferences

3. Press the Paper tab in Printing Preferences, and select an appropriate paper type

For example, if you want to use a label, set the paper type to Label.

4. Select Manual Feeder in paper source, then press OK.

5. Start printing in application.

6. After printing, close the multi-purpose tray.

e 8 of 14Media and tra

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...