Manualshelf

User guide

ManualsBrandsMuratec ManualsComputer equipmentMFX-3550
61626364656667686970
CHANGING THE DISPLAY LANGUAGE
To change the language that appears on the display, follow the steps below:
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Language and press OK.
5. Press the up/down arrow to display the language you want.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
SETTING THE DATE AND TIME
When you set the time and date, they are used in delay fax and delay print. They are printed on
reports. If, however, they are not correct, you need to change it for the correct time being.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Date & Time and press OK.
5. Enter the correct time and date using up/down, left/right arrow or numeric keypad.
Month = 01 to 12,
Day = 01 to 31,
Year = requires four digits,
Hour = 01 to 12,
Minute = 00 to 59,
and you can also select AM or PM.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.
CHANGING THE CLOCK MODE
You can set your machine to display the current time using either a 12-hour or 24-hour format.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Clock Mode and press OK.
5. Press the up/down arrow to select the other mode and press OK.
6. Press Stop/Clear to return to ready mode.
CHANGING THE DEFAULT MODE
Your machine is preset to Copy mode. You can switch this default mode between Fax mode and Copy
mode.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
machine’s display screen.
If the machine’s power is cut off, you need to reset the correct time and date once the power has
been restored.
Pa
g
e 2 of 7Basic setu
p
8/4/2009htt
p
://downloadcenter.samsun
g
.com/content/UM/200907/20090721152022250/EN/en
g
lish
/
...
61