User guide

open the SetIPapplet.html page that shows the printer’s name and IP address information.
4. Highlight the printer information row and select the Setup icon, which is the second icon from
the left in the application menu bar. A TCP/IP Configuration window will open.
5. Enter the printer’s new information into the configuration window as follows. In a corporate
intranet, you may need to have this information assigned by a network manager before
proceeding.
z
MAC Address: Find the machine’s MAC address from the Network Configuration Report
and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
z
IP Address: Enter a new IP address for your machine.
z
Subnet Mask: Enter a new Subnet Mask for your machine.
z
Default Gateway: Enter ta new Gateway for your machine.
6. Select Apply, then OK, and OK again. The printer will automatically print the configuration
report. Confirm that all the settings are correct. Quit Safari. You may close and eject the
installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully
changed the IP address, subnet mask, and gateway.
Network parameter setting
You can also set up the various network settings through the network administration programs such
as SyncThru™ Web Admin Service and SyncThru™ Web Service.
Installing wired network connected machine’s driver
You must install the printer driver software for printing. The software includes drivers, applications,
and other user friendly programs.
Make sure that the network setup for your machine is completed. All applications should be closed
on your computer before beginning installation.
Windows
This is recommended for most users. All components necessary for machine operations will be
installed.
1. Make sure that the machine is connected to your network and powered on. Also, your
machine’s IP address should have been set.
2. Insert the supplied software CD into your CD-ROM drive. The software CD should automatically
run and an installation window appear.
z
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe,
replacing “X” with the letter which represents your drive. Click OK.
z
If you use Windows Vista, click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents your drive and click OK.
z
If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run
program field, and click Continue in the User Account Control windows.
3. Click Next.
If necessary, select a language from the drop-down list.
4. Select Typical installation for a network printer and then click Next.
If the printer was not shown in the information row, select the Manual Setting icon (third
from left) to open the TCP/IP Configuration window.
The printer’s MAC address is the hardware serial number of the on-board network
interface and can be found on the Network Configuration Report.
The following procedure is based on Windows XP. The procedure and popup window which
appears during the installation may differ depending on the operating system, machine
features, or the interface in use.
If your printer is not connected to the network, the following window will appear. Select a
setup option you want, click Next.
Pa
g
e 5 of 24
N
etwork setu
p
8/4/2009htt
p
://downloadcenter.samsun
g
.com/content/UM/200907/20090721152022250/EN/en
g
lish
/
...
40