User`s guide

2-34 Advanced Scan Features
Press [Scan Path].
3
Select [ON], and press [Enter].
4
If you select [OFF], the scan path notification setting is disabled.
Press [Close].
5
Specify the destination, and press <Start>.
6
For details on the procedure, refer to “Basic Scanning”. (See page 1-2.)
Note
The notification e-mail is sent to the e-mail address registered in the user •
information. This function can only be used if an e-mail address is registered in the
user information.
For details on registering user information, refer to Chapter 3, “Registering Users” •
in the OfficeBridge Guide.