User`s guide

6-4 Checking the Transmission Result (Transmission Report)
Reading the Transmission Report
123456 78 9
10
11
Number Item Description
1 Destination The destination name, fax number, or e-mail address
2 Type
FAX: For fax transmission
IFAX: For Internet Fax transmission
3 Mode
The resolution used for the communication
4 Start Time The time the communication started
5 Time
The time that elapsed from when the communication started
until when the communication ended
6 Page The number of pages transmitted
7 Note
The type of communication is printed for the following types of
communication:
• Manual Tx
• Polling Tx
• F-Code Tx
• Broadcast Tx
• PC-Fax Tx
• PC-Fax F-code Tx
• Archive Tx
• Rerouted Fax Tx
8 Result
OK: Completed normally
*: ECM Mode transmission
#: Super G3 transmission
Code: The communication error code
*1
9 Details
Blank when the communication ends without an error
When a communication error occurs, the error message is
printed
*1
10 Sender The user name (only when a user is logged in)
11 − The date and time the report was printed
When a communication error code and error message is printed, confirm the content of the *1
error and perform the transmission again. For details, refer to Chapter 4, “Error Messages” in
the Administrator’s Guide.