User`s guide

4-24 F-Code Communications
Item
Secure
Box
Bulletin
Box
Description
Erase Tx
Doc
−
Register if
necessary
If this setting is enabled, stored documents are erased after
transmission.
Note
To change the type of a box, delete the F-code box you want to change, and register •
it again. (See page 4-32.)
Up to 20 F-code boxes can be registered.•
Registering / Editing Secure F-Code Boxes

This section describes the procedure for registering secure F-code boxes. When editing,
select the box you want to edit in step 4, and press [Edit]. Enter the I.D. Code and press
[Enter], and then select the item you want to edit.
Press <Setting>.
1
Press [Register].
2
Press [F-Code Box].
3
Press [Add].
4
When editing, select the box you want to edit, and press [Edit].