User`s guide

4-16 Various Fax Functions
Specify the destination, and press <Start>.
7
For details on specifying the destination, refer to “Specifying Destinations”. (See page 5-2.)
Note
After scanning the document, you can check or delete the reserved transmission by •
pressing <Job Confirm.

Fax Cancel>. (See page 3-31.)
To change the specified time after scheduling the transmission, you need to delete •
the scheduled transmission and then set it again.
Transmitting Faxes to a Fax Server (E-mail Gateway)
You can transmit to a fax server as if you were transmitting to a regular telephone line.
The e-mail gateway settings need to be registered in advance.
For details on registering an e-mail gateway, refer to Chapter 2, “Specifying the Network
Settings” in the Administrator’s Guide.
Note
This function cannot be used in the following cases:
Real time transmission•
Polling reception.•
F-Code transmission•
Closed transmission•
ID check transmission•
Load the document, and press <Fax>.
1
Press [Advanced].
2
Press [E Gateway].
3