User`s guide

1
2
3
Basic Fax Functions
Basic Faxing 3-25
Press [Resolution].
2
If [Resolution] is not displayed, press [Advanced] and then select [Resolution].
Select the desired resolution, and press [Enter].
3
Specify the destination, and press <Start>.
4
For details on specifying the destination, refer to “• Selecting from the Address Book”. (See
page 5-2.)
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and press •
[Next Doc]. Press [Tx Start] to start transmission.
Note
The Super Fine mode may not be supported by the destination machine. In this •
case, the optimal resolution will be automatically selected.
The communication time differs according to the selected resolution.•