Instruction manual

2-76 Specifying the Network Settings
Setting the Automatic Logout Time
You can set the time it takes before the machine automatically logs out a logged in user if
no operations have been performed on the machine.
Note
You can also set the automatic logout time using • OfficeBridge. For details, refer to
Chapter 3, “Specifying Device Settings” in the OfficeBridge Guide.
For details on manually logging out, refer to “• Logging Out”. (See page 1-46.)
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Network Settings].
4
Press [Automatic LogoutTime].
5