Specifications

3-5
Machine Parameter B:0
Switch
Initial
Setting
Adjust Usage/Comments
70
60
50
40
30
20
11
01
Leading edge document
margin adjustment
(ADF)
Adjusts the leading edge
margin from standby position
to the start of the scanning
position.
1 step = 5 / 600 dpi
(0.2116 mm)
Note:
These values
are factory set and should
not be adjusted unless
instructed by a Muratec
technical representative.
Switch 76543210 Settings
25 steps 00011001 +5.29 mm
:
00100000 +6.77 mm
:
00010000 +3.39 mm
:
00001000 +1.69 mm
:
00000011 +0.63 mm Initial setting
:
00000000 0 mm Standard
:
10001000 -1.69 mm
:
10010000 -3.39 mm
:
-25 steps 10011001 -5.29 mm
Machine Parameter B:1
Switch
Initial
Setting
Adjust Usage/Comments
70
60
50
40
30
20
10
00
Adjustment of the scanning
stretching and squeezing for
ADF.
(Horizontal)
The plus setting stretch the
image data and the minus
setting squeeze it.
Each setting changes by
0.1%
Switch 76543210 Settings
00001111 +1.5 %
:
00001000 +0.8 %
:
00000100 +0.4 %
:
00000010 +0.2 %
00000010 +0.1 %
00000000 0 % Initial setting
00000010 -0.1 %
00000010 -0.2 %
:
10000100 -0.4 %
:
10001000 -0.8 %
:
10001111 -1.5 %