Specifications

2-45
2.4.15.1 Drive Mechanism
•
Drive from the Main Motor is transmitted via a gear train to the Right Fusing Roller.
Right Fusing Roller
Paper Exit Roller
Main Motor (M2)
Electrical Component Control Signal ON OFF
M2
PJ16A-1
See block diagram of printer.
LH
2.4.15.2 Fusing Rollers Pressure Mechanism
•
To ensure that there is a certain width of area of contact between the Left and Right Fusing Rollers,
pressure springs are installed.
•
The rollers are held pressed against each other at all times and they are released only when servicing
the machine or replacing parts.
•
The pressure between the two rollers is approx. 12 kg.
•
The rollers can be released by moving the Fusing Misfeed Clearing Lever in the direction of the arrow.