Specifications

Second phone line Options
6-93
6.8.3 Adjustment
Important:
These memory switches and unique switches only for AL-250 are shown in this section.
6.8.3.1 Memory Switches Adjustment
If necessary, you must set the following switches.
1. From Fax standby mode, press
MENU, *, 1.
2. Select the desired memory switch by pressing a one-touch key plus a number on the keypad.
3. Press
[Enter]
.
Memory Switch B:0 – Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 1 Refer to Section 3 of this
FEM
6 0 Refer to Section 3 of this
FEM
5 0 Refer to Section 3 of this
FEM
4 0 Refer to Section 3 of this
FEM
3 1 Maximum transmit speed, kbps
2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
0 0 0 0 0 0 0 0 1 1 1 1 1 1
21
0 0 0 0 1 1 1 1 0 0 0 0 1 1
10
0 0 1 1 0 0 1 1 0 0 1 1 0 0
01
0 1 0 1 0 1 0 1 0 1 0 1 0 1
Note:
This setting effect for both phone line 1 and 2.
Memory Switch C:0 – Reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Refer to Section 3 of this
FEM
6 0 Refer to Section 3 of this
FEM
5 0 Factory use only
4 0 Factory use only
3 1 Receive speed (kbps)
Maximum receive speed may be slowed to compensate for poor phone lines.
21
2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
10
0 0 0 0 0 0 0 0 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1
01
0 0 1 1 0 0 1 1 0 0 1 1 0 0
0 1 0 1 0 1 0 1 0 1 0 1 0 1
Note:
This setting effect for both phone line 1 and 2.