Specifications

Large Capacity Cassette Options
6-51
6.5.3.1.2 Types of Misfeed and Misfeed Detection Timings
Type Detection Timing
Paper left The output from Registration Sensor RSEN is blocked (H) when the
machine Power Switch is turned ON or a misfeed is reset.
Lift 1 paper take-up failure
detection
Paper Standby Position Sensor S1 is not blocked (H) within a given
period of time after Take-Up Clutch 1 P1CL has been energized.
Paper Empty Sensor 1 PPS1 is not blocked (H) within a given period
of time after Take-Up Clutch 2 P2CL has been energized.
Lift 2 paper take-up failure
detection
S1 is not blocked (H) within a given period of time after P1CL has
been energized.
Registration Sensor paper
leading edge detection
RSEN is not blocked (H) within a given period of time after Separator
Clutch BCL has been energized (after two paper take-up retry
sequences).
Registration Sensor paper
trailing edge detection
RSEN is not unblocked (L) within a given period of time after
Registration Clutch RCL has been energized.
• LCC only:
Synchronizing Roller Sensor PC2 is not unblocked (H) within a given
period of time after Registration Clutch RCL has been turned ON.
Vertical transport paper
leading edge detection
• Additional 1st cassette + LCC:
Take-Up Sensor S3 of the additional 1st drawer is not blocked (H)
within a given period of time after Registration Clutch RCL has been
turned ON.
Size error detection
* The detection described on
the right is also made during
a 2-sided copy cycle.
• LCC only:
The period of time is counted from when Synchronizing Roller Clutch
CL1 is energized to when Synchronizing Roller Sensor PC2 is
blocked (L). The difference between the detected length and the
paper size which has been recognized is more than ±20 mm.
• Additional 1st cassette + LCC:
The period of time is counted from when Take-Up Sensor S3 of the
additional 1st drawer is blocked (L) to when it is unblocked (H). The
difference between the detected length and the paper size which has
been recognized is more than ±20 mm.