Specifications

Options Large Capacity Cassette
6-38
6.5.1.6.7 Edge Guides and Trailing Edge Stop
The Trailing Edge Stop is screwed into position (not used for Letter crosswise).
Edge Guides can be slid into any desired position.
Whenever the positions of the Edge Guides and Trailing Edge Stop have been changed, be sure to
perform the paper size setting procedure. (See “Paper Size Setting” that follows.)
* The inch area LCC can be set for Letter crosswise only.
Edge guides
Trailing edge stops
6.5.1.6.8 Paper Size Setting
The paper sizes that can be set are A4 crosswise, B5 crosswise, and Letter crosswise.
After the positions of the Edge Guides and Trailing Edge Stop have been changed, place the DIP switch
keys on LCC Main Board PWB-A in the corresponding positions according to the current paper size.
1 234
SW1
PWB-A
ON
OFF
SW1 Letter Crosswise A4 Crosswise B5 Crosswise
1 OFF ON OFF
2OFF OFF ON
3 OFF OFF OFF
4 OFF OFF OFF