Specifications

Paper Feed Unit Options
6-21
6.4.3 ADJUSTMENT
6.4.3.1 Paper Lifting Spring Adjustment
Whenever the paper size has been changed, replace the Paper Lifting Springs by following the table given
below. (For the replacement procedure, see “6.4.2 DISASSEMBLY”.)
The replacement springs are housed on the bottom of the cassette.
Paper Size Name CD × FD (mm) Spring
A3 L 297 × 420 A
B4 L 257 × 364 A
A4 L 210 × 297 B
A4 C 297 × 210 B
B5 L 182 × 257 —
B5 C 257 × 182 —
F4 L 210 × 330 B
11×17 L
279 × 432 A
Legal L 216 × 356 B
Letter L 216 × 279 B
Letter C 279 × 216 B
Executive L
184 × 267
—
Executive C
267 × 184
—
L: Lengthwise; C: Crosswise
Spring A : Silver
Spring B : Black
Spring — : Not supported
6.4.3.2 Paper Take-Up Rolls Adjustment
Whenever the paper size has been changed, change the Paper Take-Up Rolls position by following the
table given below. (For the removing procedure, see DISASSEMBLY.)
B5L, Executive L A4L, Letter L, Legal L,
B4L, A4C, A3L,
Letter C, F4L, 11×17
Paper take-up
roller shaft
Front side
Initial setting