Specifications

2-10
2.3.2 FBS section
•
Light reflected from the original passes through three mirrors and a lens to form a reduced image on the
CCD Sensor as the Scanner is moved by the Scanner Motor. The CCD sensor converts the light pattern
(image data) into an electrical image signal.
•
The electrical image signal is then output to the Main Board.
1. Exposure Lamp 2. Original length detecting sensor (Multi Beam sensor)
3. FBS Motor 4. Inverter Board
5. CCD Board (CCD) and Lens 6. Scanner End Position Sensor
7. B4 sensor 8. A4 sensor
9. Mirrors Carriage A 10. Mirror A
11. Scanner Home Position Sensor 12. Mirror B and C
13. Mirrors Carriage B