Specifications

4-34
(6) 28 Shift Tray shift motion failure
Step Check Item Result Action
1 Does the Shift Tray move in the initial
operation?
YES Check step 4.
2 Does the Shift Tray slide smoothly when
the gear is turned manually with the Shift
Motor removed?
NO Check for contamination and improper
installation.
YES Check the wiring between the Main
Board and Shift Motor and, if it is intact,
change the motor.
3 Is an output signal being sent from the
Main Board to Shift Motor?
NO Change the Main Board.
4 Are the Shift Home Sensor and its light
blocking plate dirty?
YES Remove foreign matter or clean.
YES Change the Main Board.5 Is the Shift Home Sensor output signal
properly applied to the Main Board?
NO Check the wiring between the Main
Board and Shift Home Sensor and, if it is
intact, change the sensor.