Specifications

3-89
Memory Switch E:0 - Scanner
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 1 Factory use only
1 0 Factory use only
0 1 Document TX length limit
0: 3.6 meters
1: 1 meter
Setting to unlimited will override document jam
sensing.
Memory Switch E:1 ∼ F:9 --- Factory use only
Memory Switch G:0 - Remote reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 CML relay off time after
dialing
0: 1 sec
1: 200 ms
When dialing from the keypad, phone line noise
may occur as the CML relay switches on and off.
Set this switch to “0” to avoid this.
5 0 DTMF tones heard through
handset
0: No
1: Yes
Determines if DTMF tones are produced through
the handset in off-hook dialing.
4 0 Factory use only
3 0 Factory use only
2 0 Switch to fax upon TAD
disconnect
0: No
1: Yes
In Ans/Fax Ready mode, if this switch is set to “1”,
the machine will switch to fax when any device
connected to the external telephone jack, such as a
second phone or TAD, hangs up.
1 0 Remote reception from the
second phone
0: No
1: Yes
Ability to perform remote reception (hook-flash
transfer) from the second phone.
0 0 Remote reception from fax
handset
0: No
1: Yes
Ability to perform remote reception (hook-flash
transfer) from the fax handset.