Specifications

Muratec MFX-2500 General Description
1-9
1.8 Features and Functions
1.8.1 Dialer
Item Specifications / Comments
Autodialer 300 total; 78 one-touch, 222 speed dial.
(Up to 40 digits per location; 24 characters per location ID)
Programmable one-touch. 6 total
The programmable one-touch keys simplify complex fax operation.
The following multi-step operations can be programmed.
Fax communication
•
Delayed transmission
•
Broadcasting
•
Regular polling
•
Batch transmission
•
F-code transmission
•
F-code polling
Soft key 4 total
Fax communication
Set the following On/Off operation into the Soft keys.
•
Memory transmission on/off (Default setting)
•
Transmission confirmation stamp on/off (Default setting)
•
Confirmation report on/off (Default setting)
•
Hook/Call request (Default setting)
•
Cover page on/off
•
TTI on/off
Copy
Pressing the soft key, the following copy setting display will appear.
•
Combine
•
Repeat
•
Series copy
•
Erasing boarder
•
Erasing center
•
Binding margin
•
Directional magnification
•
Positive/negative copy
•
Duplex (with optional Duplex unit)
•
Booklet (with optional Duplex unit)
Macro key 6 total
The macro keys simplify multiple fax or copy operations.
Up to 60 steps can be programmed in one macro key.
Up to 130 characters can be entered in the title of the macro key.
Telephone index Select autodialer entries in LCD by Location ID name.
Type of dialing Tone or pulse (10 pps)
Dialing pause time 2-10 seconds. (Initial setting: 2 seconds)
Redial Auto redial in fax mode, programmable for 2 to 15 attempts (default: 2) at
1 to 5 minutes intervals (default: 1); manual last-number redial.
PIN access Available
On-hook dialing Available
Dialing in the event of a
power failure
Works only if the handset is attached.
The fax can receive a telephone call, but it cannot send or receive a fax
message.