Specifications

3-81
Memory Switch A:2 - Dialer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Phone line type for the
second phone line?
0: PSTN
1: PBX
When set to PSTN, the machine checks for dial
tone and acts according to the setting of memory
switch A:0, bit 1. When set to PBX, the machine
always dials a given number of seconds after going
off-hook. Memory switch A:1 sets the number of
seconds.
Memory Switch A:3 ∼ A:4 --- Factory use only
Memory Switch A:5 - Dialer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 Factory use only
5 1 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Dual ring detection
0: No
1: Yes
When enabled, the machine is able to auto answer
an incoming ring with an off time of 120 - 60 ms.
1 0 Long ring detection
0: No
1: Yes
Allows the machine to respond to an incoming ring if
the ring on-time is longer than two seconds.
0 1 Ring frequency detection
0: No
1: Yes
When disabled, the machine will not check the ring
frequency of incoming rings.
Memory Switch A:6 ∼ A:9 --- Factory use only