Specifications

3-79
3.3 Memory Switch Adjustment
3.3.1 Setting the Memory Switches
These switches are used to program internal machine parameters. The primary back up battery maintains
these settings if power is lost.
1. From standby, press
MENU
,
*
,
1
.
2. Select the desired memory switch by cursor key or by pressing a one-touch key plus a number on the
keypad. For example, to access memory switch B:1, press one-touch “B” plus the number “1” on the
numeric keypad.
3. Press
[Enter]
.
4. To navigate through the memory switch settings:
•
Press
or of the cursor key to move the cursor.
•
Press
0
or
1
on the numeric keypad to change the bit value.
•
Press
[Enter]
to save the setting of the displayed memory switch and advance to the next
memory switch.
•
Press
[Cancel]
not to save the setting of the displayed memory switch.
5. If you want to set other memory switches, repeat step 3-5. Otherwise, proceed to step 6.
6. Press
RESET
to return the machine to standby.
3.3.2 Clearing the Memory Switches
Resets the memory switches to factory defaults.
1. From standby, press
MENU, *, 1, [Clear]
.
3. Press
[Enter]
. The memory switches will reset to factory defaults.
Note:
To finish the operation without clearing the memory switches, press
[Cancel]
.