Specifications

3-60
Machine Parameter V:4
Switch
Initial
Setting
Adjust Usage/Comments
70
60
50
40
30
20
10
00
Printer registration
adjustment (Vertical) at the
Large Capacity Cassette in
rotate printing.
Adjusts the end point to print.
The plus setting increase the
print range to the bottom and
the minus setting decrease it.
Each setting changes by
0.1 mm.
Note:
Adjust the bottom
margin in Machine Parameter
Z:4.
Note:
See Machine
Parameter U:4 for the normal
printing.
Switch 76543210 Settings
127 steps 01111111 +12.7 mm
:
32 steps 00100000 +3.2 mm
:
16 steps 00010000 +1.6 mm
:
8 steps 00001000 +0.8 mm
:
00000000 0 mm Initial setting
:
-8 steps 11110111 -0.8 mm
:
-16 steps 11101111 -1.6 mm
:
-128 steps 10000000 -12.8 mm
Note:
Set this switch after setting the margin to
“0 mm” in Unique Switch F:2. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch F:2.
Machine Parameter V:5
Switch
Initial
Setting
Adjust Usage/Comments
70
60
50
40
30
20
10
00
Printer registration
adjustment (Vertical) at the
1st cassette in rotate printing.
Adjusts the end point to print.
The plus setting increase the
print range to the bottom and
the minus setting decrease it.
Each setting changes by
0.1 mm.
Note:
Adjust the bottom
margin in Machine Parameter
Z:5.
Note:
See Machine
Parameter U:5 for the normal
printing.
Switch 76543210 Settings
127 steps 01111111 +12.7 mm
:
32 steps 00100000 +3.2 mm
:
16 steps 00010000 +1.6 mm
:
8 steps 00001000 +0.8 mm
:
00000000 0 mm Initial setting
:
-8 steps 11110111 -0.8 mm
:
-16 steps 11101111 -1.6 mm
:
-128 steps 10000000 -12.8 mm
Note:
Set this switch after setting the margin to
“0 mm” in Unique Switch F:2. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch F:2.