Operating instructions

Default copy settings
03. Auto reset mode
Note: Default:Three minutes
The machine returns to its initial condition automatically after a certain period of
time.You can change this time from 1 to 10 minutes.
Note: The machine first resets the LCD display, and after certain period of time it
resets the key settings to the initial condition.
1
Press MENU , [Copy Set].
2
Select “E. User Settings” and then press [Enter].
3
Select “03. Copy Panel Reset” and then press [Enter].
4
Enter the time to auto resetting,and then
press [Enter] to save the setting.
5
Press RESET to return to standby.
04. Scanning resolution for copy
Note: Default: 600 dpi
You can set either 400 dpi or 600 dpi for the scanning resolution in copy mode.
1
Press MENU , [Copy Set].
2
Select “E. User Settings” and then press [Enter].
3
Select “04. Copy Scan Resolution” and then press [Enter].
4
Select desired resolution for default setting
using the cursor key.
5
Press [Enter] to save the setting.
6
Press RESET to return to standby.
F. Print the copy setting
You can print the list of copy settings. In the list, the current setting is shaded.
To print the copy setting list:
1
Press MENU , [Copy Set].
2
Select “F. Print Copy Settings” using the cursor key.
3
Press [Enter].
3.5