Operating instructions

Advanced features
Erasing border
1
Press MENU .
2
Select “Erase Border” using the cursor key,
and then press [Enter].
3
Enter the upper/lower and left/right erased
margin using the numeric keypad or pressing
the and of the cursor key.
Note: You can specify the margin width as follows:
0.2″ to 2.0″ in 0.1″ steps.
Note: To change between upper/lower and left/right, press or of the
cursor key.
4
Press [Enter] to save the setting.
5
The Erase border icon will be displayed on
the LCD .
6
Set your documents,then press START .
Margin
You can make a binding margin on the copy by shifting the image to left, right,
upper or lower.
Note: You can set the desired margin between 0.1 and 1.0 inch, however, if you set
the margin too large, a part of the image might be lacked.
Note: The default setting of binding margin is 0.0 inch.You can change this
default setting.
⇒ See page 3.2.
Adjust the binding margin
1
Press MENU .
2
Select “Margin” using the cursor key, and
then press [Enter].
3
To adjust the top and bottom margin (to move
the image upper or lower) by pressing press-
ing or of the cursor key.
4
To adjust the left/right margin (to move the
image left or right) by pressing or of the
cursor key.
5
Press [Enter] to save the setting.
6
The Margin icon will be displayed on the LCD .
7
Set your documents,then press START .
2.5