Operating instructions

Advanced features
To make copy with repeat:
1
Press MENU .
2
Select “Repeat” using the cursor key, and
then press [Enter].
Note: The Auto Reduce/Enlarge is selected
automatically.
3
Select the desired repeat modes using the
cursor key.
Note: The number of documents repeated can be 2, 4 or 8.
4
If you want to change the recording paper size for combining, proceed to next
step. Otherwise, skip to step 6.
5
Press [Paper] to select the paper size, and then press [Enter].
6
You can insert the separator lines between repeated images. If you want to
insert the separator lines,proceed to next step. Otherwise, skip to step 8.
7
Press NEXT and then press [Line] to print the
separator lines. To cancel the separator lines,
press [Line] again.
Note: The width of the line can be changed.
⇒ See page 3.4.
8
If you want to change the layout, proceed to
next step. Otherwise, skip to step 12.
Note: Use this function, when you set the reduction/enlargement ratio by
yourself.
9
Press [Layout], the LCD will show:
Note: If [Layout] is not appeared on the
LCD , press NEXT until it appears.
10
Select the layout using the cursor key.
11
Press [Enter] to save the layout setting.
12
Press [Enter] to save the setting.
Note: If [Enter] is not appeared on the LCD , press NEXT .
Note: To cancel the setting of the combine function, press CLEAR .
13
The Repeat icon will be displayed on the LCD .
14
Set the documents.
Note: Set the documents with same direc-
tion as you see on the LCD in step 5.
If you set your documents in the ADF:
Press START .After the all documents in the ADF are scanned, the copies will
be printed.
If you set your document on FBS glass:
Press START after setting the first page of your documents on the FBS glass.
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
2.3