Operating instructions

1.11
Getting started
Other functions
Interrupt
You can make copies during a multi-copy run.
1
Press INTERRUPT .The interrupt key will light on.
2
Replace the document with new document for interrupt copying.
3
Make your copies.
4
After interrupt copying,press INTERRUPT again.The interrupt key will light
off.
5
Reset the previous document by following the message on the LCD and press
[Start].
The remaining number of copies of the previous multi-copy run will be made
automatically.
Reset the settings
Auto reset
During your operation, if any keys are not pressed within three minutes, the
machine reset the display to the initial screen and after more three minutes the
machine reset any key settings automatically.
Note: As default setting,the auto reset time is set three minutes.You can change
this auto reset time. ⇒ See Page 3.3.
Manual reset
Any time you press RESET , the machine resets the display to the initial screen and
press RESET again to return the machine to its initial condition.