Operating instructions

1.6
Getting started
Basic procedure
1
Make sure the machine is in the Copy mode.To change to the Copy mode,
press COPY .
2
Press RESET to clear the previous setting, if necessary.
3
Set your document.
⇒ See “How to set the document,” page 1.4.
4
Set any settings you want.
5
If you want to make only one copy of each page of the document,skip to step
7. Otherwise, proceed to step 6.
6
Use the numeric keypad to enter the desired number of copies for each page
in your document.You can set up to 99 copies.
Note: To change the number entered, overwrite it with new number. If you
want to enter fewer than 10, enter the reading zero. (For example, 05.)
7
Press START to begin the copying process.
Note: To stop the machine during multi-copying, press STOP .
Note: To return the machine to the initial condition after copying, press RESET .
Note: By default, your machine make a copy with the following conditions:
Document type:Auto
Image contrast:Auto
Paper selection:Auto
Reduce/Enlarge ratio: 100%
Note: If you do not operate the machine for a certain period after copying, the
machine returns to the initial display and after a certain period, it resets
the any setting to the default.This is called “Auto Reset”.You can change
the auto reset time. ⇒ See Page 3.5.
Select document type
You can select the two document types by pressing DOCUMENT .
PHOTO – Select this mode when copying the documents con-
taining the photographs or drawings with letters.
PHOTO / TEXT – Select this mode when copying the photographs or
drawings.
AUTO – This mode automatically set the suitable setting
according to the document type.
Note: You can change the document type priority. ⇒ See Page 3.4.
Adjust image contrast
You can adjust the copy image contrast to match your document by pressing
CONTRAST .
DARK – Darkens weak,“washed-out” images.
= – Provides some darkening of documents.
NORMAL – Suited to most documents.
= – Provides some lightening of documents.
LIGHT – Lightens up overly dark documents.
AUTO – This mode automatically sets the suitable setting
according to the document density.
Note: You can change the image contrast priority. ⇒ See Page 3.4.
Select paper
Auto paper select
The machine selects suitable sized paper automati-
cally based on the document size and the
reduce/enlarge ratio.
Note: Make sure that the “Auto” is selected. If not,
select “Auto” by pressing [Paper] or using
cursor key.