Operating instructions

i
Introduction
Thank you for choosing the Muratec MFX-2500.
The Muratec MFX-2500 is a multi-function machine, combining fac-
simile and copier features.
The operating instructions for this machine are divided into three
books. Please read the instructions carefully.
• “General reference” — Describes the basic operations and basic
caring of your machine. Covers what you have to know to use your
machine immediately.
• “Fax reference” — Describes the various faxing features.
• “Copy reference” (This book) — Describes the various copying
features.
Symbol and terms (Operating tips)
In this manual, the following symbols and terms are used, make sure you know
what they mean.
CAUTION This symbol indicates how to avoid personal injury.
Important: This instruction describes conditions or incorrect operations that
could cause damage to your machine.
Note: A note describes helpful hints,restrictions, or how to avoid diffi-
culties.
[ ] Keys that appear at the lower parts on the LCD .To press this key,
use the item select key.
“ ” Items that appear on the LCD .
BOLD WORDS Keys built into the machine’s operation panel.
LCD The Liquid Crystal Display. It shows the machine’s status, error
messages and function menu, etc.
Document A document is the original sheet(s) of paper you send or copy on
your machine.
Paper A paper is the recording paper for printing.
, It means that the direction of the document or paper. See also
“About and symbol,” page 1.4.
<Operating tips>
Here’s an example. If we say “press MENU , J , 0, 7, [Enter]”…
… you would press MENU
… then J
… then 0 (the numeric key zero)
… then 7
… and then Item select key correspond to [Enter].
Important: Even though our example above includes commas, do not enter them
into the machine.Those characters appear in our instructions to sepa-
rate one number from the other.They do not need to be entered into
your machine.