Operating instructions
1.16
Getting started
EasyStart software is already installed on your Muratec machine. It guides you
through the process of entering your machine’s settings.
Remember that the settings you make here can always be changed later.
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires — Choose either tone or
pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes —
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page.This text lists a name and a fax number,
which are called a Transmit Terminal Identifier (
TTI
). The
TTI
cannot be longer
than 22 characters.
Clearing stored settings
Before using EasyStart, clear your machine’s built-in user data memory.This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine’s memory:
1
Press
MENU
,*,2.The
LCD
now asks if you want
to clear the memory.
Note: If you don’t want to clear the memory,
just press [Cancel].
2
If you do want to clear the memory, press
[Enter].
Entering initial settings
Important: If you press
STOP
during EasyStart, your machine returns to standby
mode (its normal condition). But it will keep the settings you saved by
pressing [Enter] as described in these instructions.
1
Press
FAX
to change to Fax mode, if the machine is in Copy mode.
2
Press
MENU
, [Fax Set],
I
, [Enter].
The
LCD
shows the current calendar/clock setting, with a cursor appearing
under the first digit.
3
Use the numeric keypad to enter the correct
date and time, using a 24-hour format for the
time. For instance, to set 1:30
PM
on July 4,
2000, press 2 0 0 0 0 7 0 4 1 3 3 0.
Note: Your machine automatically inserts the
spaces and date-slash.All you have to
do is enter the digits.
To change a digit, press the cursor key to move the cursor.Then enter the cor-
rect digit.
4
Press [Enter] to save the clock setting and continue EasyStart.
5
The
LCD
now asks if you want to set the calen-
dar/clock to automatically
recognize daylight saving time (
DST
).
When the setting is On, your machine automat-
ically recognizes
DST
at 2
AM
on the appropriate
switchover Sundays each year.
When the setting is Off, no automatic change will occur.
6
Select On or Off using the cursor key.
7
Press [Enter] to save the setting and continue.
EasyStart