Operating instructions

Just in case …
What you see on the LCD What it means/What to do
Please call service The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Please supply paper The paper cassette is out of paper. Add paper to
the cassette.
Please wait Your fax machine’s printer is either warming up
or busy. Please wait until the fax is finished
printing and then re-try your command or opera-
tion.
Protect doc. stored A received document was in your fax’s memory
when you tried to turn off the security reception
passcode. Print the received document from your
fax’s memory, then retry the desired operation.
Scanner in use The command you’re trying to enter requires the
use of the scanner, which is already in use. Wait
for the fax to complete the scan, then retry the
desired command.
Too many characters You attempted to enter too many numbers or
other characters in the current operation.
Press [Cancel] to delete the extra characters,
then try again.You may wish to review the oper-
ation’s appropriate instructions.
Too many locations You tried to enter department code more than
100.Your machine can store up to 100 depart-
ment codes.
Too many steps You tried to enter too many steps for a macro.
Sure to register? You can enter up to 60 steps into a macro key.
Press [YES] to tell your fax to register these
steps, or press [NO] to cancel the registering.
1 Location or Less You tried to enter too many forwarding numbers
for fax forwarding through the numeric keypad.
You can enter up to 201 forwarding numbers by
using one-touch key, speed dial number, group
number and numeric keypad, but you can enter
only 1 location by using numeric keypad (see
pages 2.23–2.24).
What you see on the LCD What it means/What to do
30 locations or less You tried to enter too many numbers for broad-
cast through the numeric keypad.
You can enter up to 230 numbers for broadcast
using one-touch keys, speed dial numbers or
group numbers,however you can enter only 30
locations by using numeric keypad.
Press [Cancel] to delete the extra numbers and
then try again.
4.3