Operating instructions

Just in case …
What you see on the
LCD What it means/What to do
Document stored You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
...or ...
You tried to store the polling document in your
fax machine,where one already had been
stored. Wait for the fax to complete the regular
polling operation, then try again.
Enter number (0-32) You tried to enter a call group number greater
than 32.Your machine can maintain 32 call
groups,numbered 1-32 (call group 0 covers all
the groups). Determine the correct call group
identifier number and enter it, instead.
Hang up phone The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the “hook” button.
In printing The command you’re trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
In relay box You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
In secure box You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
Invalid I.D. code The F-Code box I . D . code you entered isn’t valid.
Try re-entering your F-Code box I . D . code.
Invalid number You entered the incorrect number which has no
function during the current operation.
Invalid protect passcode The protection passcode you entered isn’t valid.
Repeat the operation, entering the correct protec-
tion passcode.
What you see on the LCD What it means/What to do
Memory overflow During scanning of the document, the memory
Keep these pages? overflowed. Press [YES] to tell your fax to keep
as many pages in memory as possible, or press
[NO] to delete from memory all pages stored
during this operation (but not previous opera-
tions).
Mirror carriage error The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
No command stored You pressed REVIEW COMMANDS to review
upcoming commands,but your fax machine had
none stored.
No document stored You tried to print a document from memory, but
your fax machine had none stored.
No protect passcode You tried to protect an operation or department
code but there’s no protection passcode stored in
your fax machine.Store a protection passcode in
your machine, then retry protecting the operation
or department code.
No report You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
Not stored You selected an autodialer, batch box or F-Code
box number for which there is no phone number
programmed. Either choose another number or
dial a phone number directly from the numeric
keypad.
...or ...
You tried to turn on the department code setting
but there are no department codes stored in
your fax machine.Store at least one department
code, then try again.
PIN is not stored You selected “Mode1”in the PIN mask feature
and tried to call an autodialer number in which
no PIN has been entered, or to call using
numeric keypad without PIN . Enter a PIN , then
try again.
4.2