Specifications

3-15
Machine Parameter 108
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6 0
5 0
4 0
3 0
2 1
1 1
0 1
Printer registration
adjustment (Horizontal) for
duplex printing cassette.
Adjusts the start point to
print.
The plus setting increases
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
See table on page 3-18.
Note: Set this switch after setting the margin to
“0 mm” in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
Machine Parameter 109 and 139 --- Factory use only
Machine Parameter 140
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Printer registration
adjustment.
Adjusts the left margin at the
1st cassette for printing.
The plus setting increases
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
See table on page 3-18.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.
Machine Parameter 141
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Printer registration
adjustment.
Adjusts the left margin at the
2nd cassette for printing.
The plus setting increases
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
See table on page 3-18.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.