Specifications

3-116
3.21 Sensor input test
This mode can confirm the sensor status. When the sensor operates, the value next to sensor name changes
0 to 1. For example, when open the 1st paper cassette, the CAS1:0 change to CAS1:1.
1. Press MENU, *, 2, 2.
2. Press
or to display the desired sensor.
CAS1:0 JAM1:0 PES1:1
CAS2:0 JAM2:0 PES2:0
HPES:1 C2U :0 CVSW:1
PSS :0 PDS :0 SWB :1
DREX:1 DRNW:0 DVNW:0
DS1 :0 DS2 :0 HS :0
TXIL:0 APS :0
TMP BAT THR TS1 TS2
000 000 000 000 000
Code Sensor
name
Status Code Name Status
CAS1 OPEN1 0:1st cassette is close
1:1st cassette is open
DREX ----- 0: No drum
1: Detect drum
JAM1 JAMC1 0: 1st side cover is close
1: 1st side cover is open
DRNW ----- 0: Drum new
1: Drum used
PES1 PES 0: No paper in 1st cassette
1: Detect paper is 1st cassette
DVNW ----- 0: Developing unit new
1: Developing unit used
CAS2 OPEN2 0:2nd cassette is close
1:2nd cassette is open
DS1 DS1 0: No document
1: Document existing
JAM2 JAMC2 0: 2nd side cover is close
1: 2nd side cover is open
DS2 DS2 0: No document
1: Document existing
PES2 PES2 0: No paper in 2nd cassette
1: Detect paper is 2nd cassette
HS Home Sensor 0: Mirror outer than HS
1: Mirror inner than HS
HPES TRAYS 0:No paper in bypass tray
1:Detect paper in bypass tray
TXIL TXIL 0: Scanner cover is close
1: Scanner cover is open
C2U ----- 0: No 2nd cassette
1: 2nd cassette is attached
APS ----- 0: Platen cover is closed
1: Platen cover is open
CVSW ----- 0: Front cover is close
1: Front cover is open
TEMP ----- Show the internal
temperature of machine.
PSS PSS 0: No paper
1: Detect paper
BATT ----- Show the voltage of the
SDRAM backup battery.
PDS PDS 0: No paper
1: Detect paper jam
THRM ----- Show the temperature of
Heater roller.
SWB DPS 0:No paper
1:Detect paper
TS1 ----- Show the remaining toner
level.
TS2 ----- Show the remaining toner
level.
3. Press STOP to return to standby mode.
Note: CAS2, JAM2 and PES2 do not change, when there is no second cassette attached.
SWB does not change, when the machine has no duplex printing unit.