Specifications

3-107
1. Press MENU, *, 1, 2.
LINE1
/ /Enter
2. Select the line you want to test by pressing or and press ENTER.
If the optional second phone line is not attached, you can only test line1.
LINE1
2. Select Tonal by pressing or and press ENTER.
Tonal
3. Use or to select your desired tonal signal test, then press ENTER.
NONE
/ /Enter
Refer to the table below.
Note: It may take several moments for output signal to change.
Signal Signal
None (stop signal) V17_2400_7200_W1_B4 picture date
400 Hz tone V17_2400_7200_W0_B1 picture date
600 Hz tone V17_2400_7200_W4_B1 picture date
1100 Hz tone V17_2400_9600_W1_B0 picture date
1300 Hz tone V17_2400_9600_W1_B1 picture date
2100 Hz tone V17_2400_9600_W1_B4 picture date
3000 Hz tone V17_2400_9600_W0_B1 picture date
3400 Hz tone V17_2400_9600_W4_B1 picture date
FSK WHITE V17_2400_12000_W1_B0 picture date
FSK BLACK V17_2400_12000_W1_B1 picture date
FSK _W1_B1 V17_2400_12000_W1_B4 picture date
V27_1200_2400 picture date V17_2400_12000_W0_B1 picture date
V27_1600_4800 picture date V17_2400_12000_W4_B1 picture date
V29_2400_7200 picture date V17_2400_14400_W1_B0 picture date
V29_2400_9600 picture date V17_2400_14400_W1_B1 picture date
V17_2400_7200_W1_B0 picture date V17_2400_14400_W1_B4 picture date
V17_2400_7200_W1_B1 picture date V17_2400_14400_W0_B1 picture date
V17_2400_14400_W4_B1 picture date
Signal
V34_2400_2400 ~ 21600
V34_2800_4800 ~ 26400
V34_3000_4800 ~ 28800
V34_3200_4800 ~ 31200
V34_34290_4800 ~ 33600
VOICE
MELODY
GRBT
4. To exit the tonal signal test mode, press E under not tests.
5. Press MENU again to return to standby mode.