Specifications

3-93
Unique Switch 74 - Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Prohibit double registration
0: No
1: Yes
When set to “0”, the same phone number can be
registered in two or more one-touch keys or speed
dial numbers.
2 1 Priority of consumable order
sheet printing
0: Print after the current
printing job completed
1: Print immediately
When the drum cartridge has reached its design
life, or the toner cartridge is empty, the machine
prints a consumable order sheet (see unique switch
073).
When this switch is set at “0”, the machine not print
consumable order sheet until the current printing
job is finished.
1 0 Print the transmission time
on TCR
0: Print the transmit time
1: Blank
When set to “0”, the transmission time will be
printed on TCR.
0 1 When receive a fax message
during Auto power off mode,
the LCD will be in standby
mode
0: No
1: Yes
Unique Switch 75 ∼ 76 --- Factory use only
Unique Switch 77 - Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Countdown display
0: No
1: Yes
Determine if the machine displays the remaining
pages which can be printed after the machine
detects the “Toner low” or “Drum near end”.
Note: It will count down the number of sheets,
which can be printed.
6 1 Factory use only
5 1 Select paper with the same
width to the received
document
0: No
1: Yes
When this bit is set to “1”, the received document
will be printed on the same width paper to the
document. When it is set to “0”, a paper that will
have fewer margins will be selected.
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Factory use only
0 1 Factory use only