User`s guide

2-5SendinG a Pc fax
1
2
3
4
5
6
7
8
9
10
11
12
uSinG officebridGe
13
AI
Sending a PC fax
You can send a document from a PC application to a remote fax machine or e-mail
location. This process allows you to save time and reduce the paper consumption in
your office.
Installing the driver
In order to perform a PC fax, you should have the applicable fax driver installed on
your PC. The driver is located on the CD supplied with your machine. See “Install-
ing OfficeBridge on your PC” on page 1-10 for installation instructions.
Sending a PC fax
After the OfficeBridge driver is installed on your PC, you can send a document
directly from your PC to a remote fax machine or e-mail inbox.
The following steps provide the basic procedure for sending a PC fax.
1
Verify that your machine is properly connected to the computer and the power
has been turned on.
2
Verify that you have installed the fax driver on your computer.
3
Start the desired application program and create/open a document.
4
Click [Print] from the File menu.
Make sure that “Muratec MFX-2050/F-565 Fax” or “Muratec MFX-1450/F-525
Fax” is selected as the printer.
If you want to make any adjustments, click [Properties]. For details, see “Paper
Preferences” on page 2-6.
5
Click [Print].
The “Document Operation” dialog will appear.“Document Operation” dialog will appear.
6
When you are not logged in to OfficeBridge, select your user name and enter
your password, and click [Send].
When you are logged in to OfficeBridge, click [Send].
NOTE
You can also store the document in temporary storage and send it at a later time. In
this case, select “Temporary Storage”. See page 2-35 for instructions on sending a
document from temporary storage.
PC_Users_Guide.indb 5 2007/04/27 10:17:43