User`s guide

5-5Muratec ob infoMonitor
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
uSinG the utiLity ProGraMS
NOTE
If the drop down list does not appear after clicking [Search], first see the “Office-
Bridge setting” below and set up the IP address.
5
Enter your password, and click [OK].
If a password has not been set, simply click [OK].
• Click [Apply] to save the setting and keep the screen active.
• Click [Cancel] to close the screen without saving the changes.
OfficeBridge setting
This should be set whenever the IP address is changed or the monitoring interval is
adjusted.
1
Double-click the Muratec OB InfoMonitor icon on the task tray while
Muratec OB InfoMonitor is running.
2
Click “OfficeBridge Settings” in the “Environment settings”.
3
Click [Search].
4
Select the IP address of your machine and click [OK].
5
Enter the Monitor Interval.
This will set how often InfoMonitor checks for new documents.
NOTE
You can set the interval from 1 to 999 minutes.
6
Click [OK].
• Click [Apply] to save the setting and keep the screen active.
• Click [Close] to close the screen without saving the changes.
PC_Users_Guide.indb 5 2007/04/27 10:18:08