User`s guide

4-57network confiGuration
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
uSinG the adMin tooLS
NOTE
See Chapter 9 “ Machine Settings” in the MFP User’s Guide for instruction of each
function.
3
When you are finished, click [Save] to save the settings.
Network Settings Codes
This mode will require the entry of a passcode prior to viewing/editing the “Admin
Tools” or the “Network Settings” on the control panel.
1
Open the “Admin Tools” screen. (see page 4-4)
2
Click [Network Settings Code].
The “Network Settings Code” screen will appear.
Items Descriptions
Read/Write Code Enter a 4-digit protect code for users who can configure
the settings of the Admin Tools.
Enter twice to confirm the code.
NOTE
• The entered code is displayed as ••••• for security
reasons
Read Code Enter a 4-digit protect code for users who can read the
settings of the Admin Tools.
Enter twice to confirm the code.
NOTE
• The entered code is displayed as ••••• for security
reasons
3
When you are finished, click [Save] to save the settings.
PC_Users_Guide.indb 57 2007/04/27 10:18:06