User`s guide

4-52 network confiGuration
Network Filtering
1
Open the “Admin Tools” screen. (see page 4-4)
2
Click [Network Filtering].
The “Network Filtering” screen will appear.
Items Descriptions
MAC Address Filtering “Enable”
Select whether to enable the setting you have config-
ured. Check this box to enable the setting.
NOTE
• When this is disabled, the settings are invalid even if
they are set.
• To enter the filtering address:
(1) Click the “Accept” or “Refuse” radio button.
(2) Enter the MAC Address to accept or refuse.
(3) Click [Add].
• To delete the filtering address:
(1) Select the address in the list.
(2) Click [Delete].
NOTE
• The “Accept” or “Refuse” setting is effective for all the
address registered in the list.
PC_Users_Guide.indb 52 2007/04/27 10:18:05