User`s guide

4-50 network confiGuration
SNMP settings
1
Open the “Admin Tools” screen. (see page 4-4)
2
Click [SNMP Settings].
The “SNMP Settings” screen will appear.
Items Descriptions
Start Service Setting Set the SNMP agent service to enable or disable.
Agent Identification “Contact Destination”
Enter the administrator name.
Up to 255 characters can be entered.
“Name”
Enter the machine model name.
Up to 40 characters can be entered.
“Location”
Enter the location where the machine is installed.
Up to 100 characters can be entered.
“Name” and “Location” fields are shared with “Device
Setting” in “Management Information” column. This
means if you change these fields, the fields in Device
Setting will also be changed, and vice versa.
PC_Users_Guide.indb 50 2007/04/27 10:18:05