User`s guide

1-5tcP/iP SettinGS
1
2
3
4
5
6
7
8
9
10
11
GettinG Started
12
13
AI
TCP/IP settings
This machine uses TCP/IP protocol to communicate over the LAN, meaning the
TCP/IP settings described in this guide must be registered prior to using the
machine on the LAN.
NOTE
For more information, see “Network settings” in Chapter 9, “Machine Settings” in
the MFP User’s Guide.
IMPORTANT
In order to activate new settings, the machine must be rebooted after new set-
tings have been entered. To reboot the machine, press [OB Shutdown] and turn the
machine “Off” and after three or more seconds, turn the machine back “On”.
Opening the TCP/IP setting menu display
1
Press <Setting> on the control panel.
2
Press [Management].
3
Press [Network Settings].
PC_Users_Guide.indb 5 2007/04/27 10:17:39