Specifications

2
Machine Parameter 04
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6 0
5 1
4 1
3 0
2 0
1
0
0 0
Trailing edge document
margin adjustment.
(ADF)
Adjusts the document feed
after the trailing edge of a
document passes
Document Sensor 2 (DS2).
Each setting changes
by 0.649 mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Note: Total value of Machine
parameters 04 and 18 will
effect “Trailing edge"
document margin adjustment
(ADF)”.
Switch 76543210 Settings
00000000 0.00 mm
00000001 0.649 mm
00000010 1.298 mm
 
 
00110000 31.152 mm
← Initial setting
 
 
 
11111110 164.846 mm
11111111 165.495 mm
Machine Parameter 07
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0
2 0
1 0
0 1
DRAM capacity indication
(This switch can indicate
8 to 16 MB memory capacity)
This switch indicates the DRAM capacity.
This switch is read only, do not set any characters.
You can see the memory capacity by how many
“1s” are indicated on the LCD.
For example, if two “1s” are indicated,
i.e. “00000011”, the DRAM capacity is 16MB.