Specifications

1
Section 7
F-320 Addendum
The F-320 has some unique soft switches when compared to the F-360. The unique
switches to the F-320 are shown on the following pages. All other switches shown in
Section 3 apply to both the F-320 and the F-360. Items listed as TBD in Section were not
set at the time this manual was published.
Machine Parameter Adjustments
Machine Parameter 03
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6
1
5
0
4
0
3
0
2
0
1
0
0
1
Leading edge document
margin adjustment
(ADF)
Adjusts the leading edge
margin from Document
Sensor 2 (DS2) to the start of
the scanning position.
Each setting changes
by 0.649 mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Note: Total value of Machine
parameters 03 and 17 will
effect the “Leading edge"
document margin adjustment
(ADF)”.
Switch 76543210 Settings
00000000 0.00 mm
00000001 0.649 mm
00000010 1.298 mm
 
 
01000001 42.185 mm
← Initial setting
 
 
 
11111110 164.846 mm
11111111 165.495 mm