Specifications

3-124
3.19 Sensor input test
This mode can confirm the sensor status. When the sensor operates, the value next to sensor name changes
0 to 1. For example, when opening the 1st paper cassette, the CAS1:0 change to CAS1:1.
1. Press MENU, *, 2, 2.
Code Sensor
name
Status Code Name Status
CAS1 CASOP 0:1st cassette is close
1:1st cassette is open
DS1 DS1 0: Off
1: On
CAS2 CASOP 0:2nd cassette is close
1:2nd cassette is open
DS2 DS2 0: Off
1: On
HPES HPES 0:No paper
1:Detect paper
DB4 DB4 0: Off
1: On
PSS PSS 0: No paper
1: Detect paper
TXIL TXIL 0: Scanner cover is close
1: Scanner cover is open
JAM1 JCOP 0: 1st side cover is close
1: 1st side cover is open
TOP TCS 0: Top cover is close
1: Top cover is open
JAM2 JCOP 0: 2nd side cover is close
1: 2nd side cover is open
RXIL Cover SW 0: Printer cover is close
1: Printer cover is open
C2U ----- 0: No 2nd cassette
1: 2nd cassette is attached
HV24 Fuse of HVPS 0: Normality
1: Abnormal
PDS PDS 0: No paper
1: Detect paper jam
FAN Fan motor 0: Turning
1: Stop
PES1 PES 0: No paper in 1st cassette
1: Detect paper is 1st cassette
RMOT Rx motor 0: Turning
1: Stop
PES2 PES 0: No paper in 2nd cassette
1: Detect paper is 2nd cassette
LMOT ------- Not available for this
machine.
2BU ----- 0: No 2-bin tray
1:2-bin tray is attached
DRUM DRUM SW 0: No Drum cartridge
1: Detect drum cartridge
PDS2 0: No paper
1: Detect paper jam
DSW Not available for USA
version
TEMP ----- Show the internal
temperature of machine.
THRM ----- Show the temperature of
Heater roller.
BATT ----- Show the voltage of the
SDRAM backup battery.
TONR ----- Show the remaining toner
level.
HVR ----- Show the resistance of
the transfer roller.