Specifications

3-79
Unique Switch 52 - Printer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0
2 0
1 0
0 0
LED print head exposure
time adjustment
(for PCL printing)
1 step = 1.74 µs
Note: This setting takes
effect after turning the power
switch off/on.
Initial setting is “000000” and 39.06
µsec.
If you want to change the exposure time, set this
switch within the following range.
If you set the time to be shorter, the print density will
be light.
Switch 3 2 1 0
0 0 0 1 18.23 µs Lightest
0 0 1 0 19.97 µs
0 0 1 1 21.70 µs
0 1 0 0 23.44 µs
0 1 0 1 25.17 µs
0 1 1 1 28.65 µs
1 0 0 0 30.38 µs
1 0 0 1 32.12 µs
1 0 1 0 33.85 µs
1 1 0 0 37.33 µs
1 1 0 1 39.06 µs
1 1 1 0 40.80 µs
1 1 1 1 42.53 µs Darkest
Unique Switch 53 - Printer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0
2 0
1 0
0 0
LED print head exposure
time adjustment
(for list printing
and test pattern printing)
1 step = 1.74 µs
Note: This setting takes
effect after turning the power
switch off/on.
Initial setting is “000000” and 28.65
µsec.
If you want to change the exposure time, set this
switch within the following range.
If you set the time to be shorter, the print density will
be light.
Switch 3 2 1 0
0 0 0 1 18.23 µs Lightest
0 0 1 0 19.97 µs
0 0 1 1 21.70 µs
0 1 0 0 23.44 µs
0 1 0 1 25.17 µs
0 1 1 1 28.65 µs
1 0 0 0 30.38 µs
1 0 0 1 32.12 µs
1 0 1 0 33.85 µs
1 0 1 1 35.59 µs
1 1 0 0 37.33 µs
1 1 0 1 39.06 µs
1 1 1 0 40.80 µs
1 1 1 1 42.53 µs Darkest