User`s guide

5.13
6
Enter e-mail address using a one-touch key, a speed-dial number or a mail group number.
Note: You cannot use the numeric keypad to enter an e-mail address.
To add each number, press BROADCAST between each one, then enter the number.
You can specify up to 300 numbers for a remote unit.
Note: If you want to review the numbers you entered, press [Review].
If you want to erase any number, move the cursor on it and press [Erase].
When you finish to review, press [Return] to return to the previous display.
7
Press ENTER.The LCD will show:
8
Select “TTI Type” and press ENTER.
The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers.
• Sender — Relay the document with sender unit’s TTI (don’t send your TTI).
• Both — Relay the document with both the sender unit’s TTI and your TTI.
• Yours — Relay the document with your TTI instead of the sender unit’s.
9
Using the cursor key, select the type of TTI you want, and then press ENTER.
10
Use the cursor key to select “ON” or “OFF” you want.Then press ENTER.
ON: The machine prints the received document and relays it to the e-mail address.
OFF: The machine does not print the received document, but will only relay it to the e-mail address.
11
Select “Exit” then press ENTER.
12
Press STOP to finish and return to standby.