User`s guide

5.2

TTI transmission setting

Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page.

This text lists a name, called the Transmit Terminal Identifier (TTI), a fax number and . You can set the

machine to not send the TTI.

For F-360:

Press MENU, 2, 2, 0, 8, ENTER.The LCD shows:

Using the cursor key, select the mode you want. Then press ENTER to save the setting.

For F-320:

Press MENU, 2, 2, 0, 8, ENTER.The LCD shows:

Using the cursor key, select the mode you want. Then press ENTER to save the setting.

TTI setting with the Soft Key

Soft Keys are shortcut keys. You can assign a TTI function into one of the Soft Keys if desired.

Set TTI beforehand and press the Soft Key when you transmit a document. The function is ON when the light

is on. Press the Soft Key again to turn it off.

For details, refer to your fax machine’s Operating Instructions.

Entering TTI transmission

You can enter the name you want to appear at the top of faxes you send. You can enter three TTI.

For details, refer to your fax machine’s Operating Instructions.

TTI Tx :On





/Enter

TTI transmittion