User`s guide

4.13
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching case letters.
For F-320
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you’ll be sending.
2
Press Internet Fax to choose Internet FAX communication.
3
Select “To”, “Cc” or “Bcc” by pressing the soft key which assigned “To/Cc/Bcc” (see page 4.2).
4
Press SPEED DIAL/GROUP twice.
5
Enter a mail group number (33-64).
Note: If you want to send a e-mail to several groups at a time, press BROADCAST then repeat steps 3–5.
6
Press START. The machine will start to scan the document into memory. Then it will start sending the e-mail
message.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press ENTER without entering any characters.
To use a different account, press to display the account name list, then use or to select the account
name, then press ENTER twice.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching case letters.
Password ;Upper
_
AccountName;Upper
_
Press Start
To :G33_
Enter Group No.
To :G_
MailAddress;Lower
_