User`s guide

4.11
7
After entering, press START. The machine will start to scan the document into memory. Then it will start
sending the e-mail message to each address.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press [Default] or ENTER without entering any characters.
To use a different account, press [List], and use the cursor key to select the account name from the list,
then press ENTER.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching the case of letters.
For F-320
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you’ll be sending.
2
Press Internet Fax to choose Internet FAX communication.
3
Press BROADCAST .
4
Select “To”, “Cc” or “Bcc” by pressing the soft key which assigned “To/Cc/Bcc” (see page 4.2).
5
Enter the first e-mail address.Use either a one-touch number, a speed-dial number, a mail group number
or numeric keypad.
6
To add more e-mail addresses, repeat steps 3 to 5.
You can send up to 230 numbers for a broadcast.
Note: If you enter characters by mistake,press CANCEL to erase them.
7
Press START. The machine will start to scan the document into memory. Then it will start sending the e-mail
message.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press ENTER without entering any characters.
To use a different account, press to display the account name list, then use or to select the account
name, then press ENTER twice.
AccountName;Upper
_
ABC Shoji
To :S001,Cc :[01]_
MailAddress;Lower
_