User Guide

M AINTENANCE
8.9
8
Replacing the Toner Cartridge
When the toner eventually runs out, only blank pages print when a print
job is sent or when a fax is received. At this stage, the toner cartridge
needs to be replaced. The display on the control panel shows the
warning message, “Toner Empty” and the machine stops printing.
NOTE : You can set the machine to ignore the “Toner Empty”
message and continue printing. See page 8.11.
1 Open the front cover.
2 Lightly pushing the used cartridge down, pull it out.
3 Unpack the new toner cartridge and gently roll it
horizontally four or five times to distribute the toner evenly
inside the cartridge.
4 Slide the new toner cartridge in until it locks into place.
5 Close the front cover.